Rock slates for dye sublimation and 2 plastic foot stands are included plus box and bubble wrap.
Two styles and sizes to choose from.
6x8" 150x200mm
8x8" 200mmx200mm.
To add color to the rough edges of the stone increase the bleed edge by 3/4
of an inch and wrap the transfer around the substrate on all 4 sides. Secure
with heat tape.
- Make sure that the sublistones are at room temperature before sublimating.
The temperature of the stone prior to sublimating will greatly influence the
dwell time necessary for best results.
Layer the press from the bottom pad to the top heat platen as follows:
1. teflon sheet or scratch paper
2. green heat conductive pad
3. transfer - face up
4. sublistone - face down
5. teflon sheet or scratch paper
Steps:
1. Attach transfer to substrate with heat tape wrapping all 4 edges around
the substrate.
2. Place the substrate and transfer onto the heat conductive pad (transfer on
under the substrate).
3. Place the teflon sheet or scratch paper over all the materials.
4. Press the items using the setting listed above.
5. Remove items from the press immediately. Use heat resistant gloves if
necessary - the items will be very hot.